Container transfer from truck · ZFITA solutions

Container Loading & Unloading from Truck

Need to place a shipping container on the ground—or lift it back onto a truck—without arranging a mobile crane for every transfer? ZFITA helps evaluate four-corner hydraulic container lifting jacks against cranes, reach stackers and other container-handling methods.

20ft & 40ft ContainersFour-Corner Hydraulic LiftingTruck-to-Ground Transfer40T Standard System
The task

Which Container Transfer Method Fits Your Site?

Removing a container from a truck is not the same as moving a container across a yard. The right equipment depends on the load, available space, frequency of operation and whether the container must be stacked or transported after lifting.

01 / Truck to Ground

Unload the Container from a Chassis

Raise a compatible container to a verified clearance, remove the truck chassis, then lower the container at a designated ground-level position.

02 / Ground to Truck

Return the Container to a Truck

Lift a ground-positioned container so a suitable chassis can be placed underneath, then lower and secure it for transport.

03 / Yard Handling

Move or Stack Containers Elsewhere

If containers must travel around the yard or be stacked, use equipment designed for that task, such as a straddle carrier or reach stacker.

Compare available methods

Container Lifting Jacks vs. Cranes, Reach Stackers & Straddle Carriers

No single method is best for every project. The four-corner jack system is especially relevant for stationary transfers where frequent container stacking or loaded travel is not required.

EquipmentBest-Suited TaskMain ConsiderationsWhen to Choose
Four-Corner Hydraulic Container Lifting JacksLift a compatible container from truck to ground, and back onto a chassisFour lifting positions; suitable bearing surface; synchronization; rated load; verified chassis clearance; time to position jacksStationary, low-to-moderate-frequency transfers without yard movement
Mobile Crane / Truck-Mounted CraneLift and place a container within the machine's rated working rangeCrane load chart, rigging, ground and outrigger conditions, radius, personnel and schedulingOccasional lifting or projects requiring versatile positioning
Reach StackerFrequent lifting, container transport and stackingMachine access, ground pavement, maneuvering room, staffing and capital/operating costBusy depots and logistics yards handling many containers
Container Straddle CarrierPick up containers and move them to another location within a yardTravel route, turning radius, surface capacity, container weight and stacking capabilityOn-site container transfer and yard movement
Heavy-Duty Forklift with Approved AttachmentSpecific approved container-handling tasksMachine ratings, attachment certification and container lifting points; not a substitute for approved lifting designOnly where equipment and container are explicitly compatible
ZFITA advantage, within the right use case: The four-jack arrangement can avoid dependence on a large container-handling vehicle for a fixed truck-to-ground transfer. It does not provide yard transportation or stacking, and it does not remove the need for ground-bearing verification and safe operating procedures.
Primary equipment

ZFITA Four-Corner Hydraulic Container Lifting System

ZFITA's portable container lifting jacks use four hydraulic units positioned at the container corners. Synchronized lifting allows the container to be raised vertically so that a compatible truck chassis can be removed or positioned underneath.

Unlike a container tilter, the system does not rotate a container to discharge bulk cargo. Unlike a straddle carrier, it does not drive around the yard with a suspended container.

  • Four independent lifting units with coordinated hydraulic operation
  • Wireless remote control in the published configuration
  • 20ft and 40ft ISO container applications, subject to connections and geometry
  • Equipment that can be relocated and set up at an appropriate working position
CHECK PRODUCT SPECIFICATIONS
ZFITA four corner hydraulic container lifting jacks installed around an ISO shipping containerPRODUCT PHOTO 01 · Paste verified lifting jacks photo URL into src=""
Four-corner hydraulic system. Add a real ZFITA machine photograph.
40,000 kgPublished standard complete-system rating
4 UnitsHydraulic lifting jacks
20ft / 40ftPublished container-size range
1,750 mmPublished hydraulic stroke, not guaranteed chassis clearance
ZFITA also references a 45-ton upgrade, but its complete load rating, unit loads and supporting documents must be confirmed independently. Do not infer that 1,750 mm of hydraulic stroke guarantees the required under-container vehicle clearance.
Operating process

How Container Loading & Unloading from a Truck Works

STEP 01

Confirm the Load & Working Site

Check the ISO container, gross weight, center of gravity, corner fittings, trailer height and ground-bearing conditions.

STEP 02

Position & Secure the Four Jacks

Align the lifting units at the designated container lifting points. Complete connection and system checks according to the approved instructions.

STEP 03

Raise the Container

Lift the container in a controlled, synchronized manner until a safe, verified clearance is reached.

STEP 04

Remove or Position the Chassis

Move the truck chassis only after the operating procedure confirms suitable container support and clearance.

STEP 05

Lower & Complete the Transfer

Lower the container onto its designated supports or onto the compatible chassis, then finish securing and disengagement procedures.

ZFITA hydraulic container lifting jacks raising shipping container from truck chassisOPERATING PHOTO 02 · Paste actual truck-to-ground transfer photo URL into src=""
Where this option works

When Is a Portable Container Jacking System the Right Choice?

Potentially suitable

Factory & Warehouse Receiving

Ground-positioning a container for cargo handling when a permanent container crane is not available at the facility.

Potentially suitable

Occasional Truck Transfers

Periodic delivery and collection where the site does not require continuous container stacking or yard transport.

Potentially suitable

Industrial Equipment Containers

Compatible containerized equipment can be transferred subject to approved structure, gross weight and center-of-gravity assessment.

Choose another system

High-Frequency Container Stacking

A reach stacker or purpose-built gantry crane may be more suitable for repeated lifting and stacking cycles.

Choose another system

Loaded Container Travel

Use a container straddle carrier or appropriate transport equipment when the container must move across the yard.

Engineering review required

Uneven or Weak Ground

Portable does not mean unrestricted ground conditions. Bearing pressure, levelness, support pads and ground stability must be checked.

Application scenario & project documentation

A Practical Truck-to-Ground Container Transfer Scenario

This is an illustrative use case based on the equipment's operating principle—not a claim about a completed customer installation. Replace it with a verified ZFITA project once the customer details and photos are available.

Illustrative scenario — not a verified project

Customer Requirement

A factory receives full shipping containers on truck chassis but needs the containers positioned on the ground for temporary storage or cargo handling. The site handles containers periodically and does not require container stacking.

ZFITA Equipment Approach

The factory and ZFITA review maximum gross weight, ISO corner lifting compatibility, ground conditions and chassis clearance. If the system is suitable, four synchronized hydraulic jacks lift the container from the chassis for ground-level placement.

What the Customer Needs to Verify

The site must confirm rated lifting loads, the actual lifting geometry, chassis movement clearance, permitted ground bearing and the operating procedure. Any time or cost benefits should be calculated from actual workload and equipment alternatives.

Verified ZFITA container lifting jacks customer project transferring a shipping container from a truckVERIFIED PROJECT PHOTO 03 · Leave blank until a real ZFITA lifting-jacks case is available

Engineering checklist

What Information Does ZFITA Need for Your Project?

Container & Truck

  • 20ft or 40ft; standard or high cube
  • Gross container weight including contents
  • Container type and corner connection details
  • Truck chassis height and wheel/clearance envelope
  • Required lift and lowering sequence

Site & Operations

  • Ground surface and bearing capacity
  • Available operating space and route for the chassis
  • Containers transferred per shift / week
  • Power supply voltage and frequency
  • Destination country and site photos/drawings

This is a container-handling solution page. For complete machinery dimensions and optional configurations, see the Container Lifting Jacks product page. For actual on-site container transportation, see the On-Site Container Transfer Solution.

Frequently asked questions

Container Transfer from Truck FAQ

Can ZFITA container lifting jacks unload a full shipping container from a truck?

They are designed for compatible loaded containers within the verified complete-system rating. The standard listed capacity is 40,000 kg. Container weight distribution, approved lifting points and site conditions must also be evaluated.

Can this system lift a container without a crane?

Yes, a four-corner jack system can perform the stationary lifting and lowering task without a crane, provided the application meets its requirements. Separate equipment may still be needed to position and relocate the individual jack units.

Can the system transport a container across a yard?

No. Container lifting jacks raise and lower a container at a working position. A straddle carrier, reach stacker or another approved transport machine is required for loaded travel across the yard.

Is it always cheaper or faster than a reach stacker?

No. Total cost and throughput depend on operating frequency, setup time, maintenance, staffing, travel and stacking requirements. Repeated high-volume container moves may justify a reach stacker.

Does a portable container jacking system work on uneven ground?

It still needs an engineered, stable, appropriately level and load-bearing support surface. Portability does not remove ground preparation or safety requirements.

What is the difference between container lifting jacks and a container tilter?

Jacks provide vertical lifting between a truck and ground. A container tilter rotates a container to discharge or load bulk materials. These are different equipment applications.

Project enquiry

Need to Lift Containers Between Truck & Ground?

Send ZFITA your container size, maximum gross weight, truck chassis details, required ground clearance, working-site conditions and operation frequency. We can help assess whether portable hydraulic container lifting jacks are appropriate.