Telescopic Conveyor for Container Loading Manufacturer
Mobile telescopic belt conveyors for feeding grain, compatible mineral granules and other suitable dry bulk materials directly into 20GP, 40GP and 40HQ containers. Extend the belt discharge point into the container, move it as filling progresses, and retract the conveyor when loading is complete.

Mobile Telescopic Container Loading Conveyor — Direct Bulk Feeding
ZFITA manufactures telescopic belt conveyor configurations for horizontal container loading. The machine conveys the material—not the shipping container. Its mobile frame can be positioned at a loading bay or suitable industrial yard, while the telescopic belt extends through the container doorway to deliver material deeper inside.
Telescopic Reach
Retractable conveyor boom adjusts the discharge point as material accumulates along the container length.
Mobile Frame
Wheeled configurations can be relocated between compatible loading stations; brakes and stabilization apply during operation.
Flexible Belt Options
Choose belt width and conveyor configuration based on cargo properties, desired capacity and loading geometry.


Size ranges represent selectable equipment configurations, not a single machine extending from 3 m to 28 m. Final reach and container compatibility depend on the selected design and site setup.
Telescopic Container Loading Conveyor Working Video
Watch the equipment demonstration on YouTube to see how the mobile telescopic conveyor extends into a shipping container for bulk loading.

How Does a Telescopic Conveyor Load a Container?
Five practical steps from equipment positioning to container dispatch.
Place the Mobile Conveyor
Align the feeding system with the container door; verify ground support, access and clearance.
Reach Inside the Container
Extend the telescopic belt boom into the container to the required discharge location.
Convey Bulk Material
Run the motor-driven belt with compatible upstream hopper or conveyor feeding.
Adjust Loading Position
Retract or reposition the discharge end progressively as the loading zone fills.
Complete Loading
Stop feeding, retract clear of the container, and perform weight and loading checks.
Mobile Telescopic Belt Conveyor Specifications
Below are the size configurations confirmed for this product range, separated from technical values that require selection by cargo and model.
| Parameter | Product Range / Status | Engineering Note |
|---|---|---|
| Equipment Type | Mobile Telescopic Belt Conveyor | Horizontal loading of compatible dry bulk materials |
| Container Compatibility | 20GP / 40GP / 40HQ | Check doorway clearance and site geometry |
| Retracted Length | 3–8 m | Available designs; model-specific |
| Maximum Extended Length | 12–28 m | Maximum overall length; actual internal reach to be confirmed |
| Belt Width | 600 / 800 / 914 / 1200 mm | 914 mm = 36 inches |
| Belt Speed | Variable / model-specific | Original page mentions 0.5–3 m/s; FAQ mentions 0.5–2.2 m/s — verify final range |
| Conveying Capacity | Calculated for each material and configuration | Depends on density, effective belt loading cross-section, speed and power |
| Discharge Height | To be confirmed | Required to verify raised trailer / truck loading |
| Power Supply / Motor | Model-specific | Confirm kW, voltage, frequency and duty cycle |
| Controls and Safety | According to selected model | Confirm VFD, E-stop, belt tracking, limit switches and guards |
| Mobile Arrangement | Wheeled positioning; details to confirm | Confirm towable / push / powered travel and stabilization |
The legacy website lists 200–2500 t/h and 1.5–180 kW. These broad values have not been carried into the new page as rated specifications because they are not tied to a specific conveyor configuration. Ask ZFITA for a model-specific equipment datasheet.
20GP, 40GP and 40HQ Container Loading
Selection depends on accessible reach, the discharge point, container doorway clearance, and actual loading geometry—not container length alone.
20GP Loading
Choose a telescopic configuration with sufficient internal reach to distribute material along a 20ft standard container.
40GP Loading
Longer loading reach is required; check extended length, belt loading limits, and positioning as the container fills.
40HQ Loading
High-cube clearance can offer more vertical space, but loading height and safe doorway access must still be confirmed.
Grain vs. Mineral Powder: How Is Conveying Capacity Determined?
Different materials have different bulk densities, flow characteristics and handling hazards. A heavier mineral powder does not automatically mean the conveyor can safely deliver a higher tonnage.
Bulk Conveying Capacity
Mass conveying capacity is estimated from the effective material cross-section on the belt, belt speed and material bulk density. The selected system must then be checked for motor power, belt tension, loading on the telescopic boom, dust control and material compatibility.
Specify Your Material
Grain: corn, wheat, soybean or feed material; confirm moisture, cleanliness and dust requirements.
Minerals: identify the ore or powder, bulk density, particle size, abrasiveness and any hazardous-dust requirements.
| Factor | Why It Matters |
|---|---|
| Belt Width | Available loading cross-section |
| Belt Speed | Conveyed volume per unit time |
| Bulk Density | Converts volume throughput to t/h |
| Travel Length | Motor demand and belt tension |
| Particle / Moisture | Flow, carryback, blockage and belt suitability |
| Dust / Abrasion | Required guards, covers, extraction and materials |
Actual t/h must be calculated and confirmed for a selected belt width, speed, material and conveyor length. No unverified grain or mineral tonnage is promised here.
What Can This Container Loading Conveyor Handle?
Grain & Agricultural Bulk
Wheat, corn, soybeans and compatible agricultural materials. Check dust, hygiene, moisture and belt-cleaning requirements.
Mineral Granules
Selected minerals and dry granules, subject to abrasion, weight, belt construction and structural capacity review.
Battery Mineral Materials
Application-specific handling of suitable battery-mineral grades. Fine graphite or hazardous dust requires additional engineering checks.
How to Choose a Mobile Telescopic Conveyor for Sale
Choose the Required Reach
Provide your container size, loading-bay position, required boom penetration and available installation length.
Confirm the Material & t/h
Share bulk density, particle size, desired conveying rate and working duty. ZFITA can size the belt and drive accordingly.
Verify Feed & Discharge Height
Provide conveyor inlet height, container-door floor elevation and any truck-bed loading requirements.
Specify Power & Mobility
Confirm operating voltage, location changes per shift, travel method, control preference and dust management requirements.
China Mobile Telescopic Conveyor Manufacturer
ZFITA supplies industrial bulk material handling machinery with steel-structure fabrication, mechanical assembly, drive-system and electrical integration capabilities. For container loading conveyor projects, equipment selection focuses on working reach, belt width, material handling performance, mobility and safe operation.
- Factory-oriented engineering and customized conveyor dimensions
- Product configuration for 20GP, 40GP and 40HQ
- Evaluation of conveying capacity based on actual bulk materials
- Support for integrated feeder and container loading layouts
- Technical review before quotation and manufacturing
Mobile Telescopic Container Loading Conveyor FAQ
Can this telescopic conveyor load both 20ft and 40ft containers?
Yes. ZFITA offers configurations for 20GP, 40GP and 40HQ. Internal reach and loading arrangement must be verified for the selected model.
Does the conveyor move the container itself?
No. This equipment transports bulk material by belt and adjusts the discharge position with a telescopic boom. Lifting or moving complete containers is a different equipment category.
How long can the boom extend?
The current product range includes maximum extended lengths of 12–28 m, depending on configuration, and retracted lengths of 3–8 m. Actual telescopic stroke must be confirmed on the model drawing.
What conveying capacity does it achieve for grain or mineral powder?
Capacity is material- and model-dependent. It is calculated using belt width, effective loading cross-section, belt speed and bulk density, followed by mechanical and motor-power verification.
Can this equipment load trucks as well?
Potentially, where the discharge height, truck body geometry, equipment access and material characteristics are compatible. Please provide the minimum/maximum required outlet height for technical review.
Is it suitable for very fine or abrasive mineral powder?
Not automatically. Fine powders may require containment and dust extraction; abrasive materials can require special belt and wear protection. Material-specific engineering confirmation is essential.
Is a mobile version available?
Yes. Wheeled mobile configurations are offered for moving the conveyor between suitable loading workstations. Confirm the actual relocation method, wheel/brake design and stabilizing provisions.
Can I request a custom telescopic conveyor for container loading?
Yes. Specify the container type, belt width, working length, required loading rate, materials, power supply and site constraints for a technical proposal.
Request a Telescopic Conveyor for Container Loading Quote
Tell ZFITA what you need to load. Provide container size (20GP / 40GP / 40HQ), material name and density, target t/h, site dimensions, desired belt width and working reach. We will review the configuration and prepare a project-specific quotation.
Related solution: Horizontal Container Loading System