Handling heavy, abrasive, and high-volume minerals in demanding environments.
ZFITA manufactures portable hydraulic container lifting jacks for lifting and lowering 20ft and 40ft ISO shipping containers between truck chassis and ground level. The four-corner synchronized container jacking system provides a standard rated lifting capacity of 40,000 kg, a maximum hydraulic stroke of 1,750 mm, and wireless remote control. Customized configurations are available for industrial container handling applications.
ZFITA manufactures container lifting jacks for lifting and lowering ISO shipping containers between truck chassis and ground level.
Our portable hydraulic container jacking system uses four synchronized lifting units positioned at the container corners. This allows suitable 20ft and 40ft shipping containers to be raised from a truck chassis and lowered to the ground without using a large container crane or reach stacker during the lifting operation.
The standard system provides a rated lifting capacity of 40,000 kg (40 tonnes), a maximum hydraulic stroke of 1,750 mm and wireless remote control.
ZFITA supplies container lifting equipment for factories, warehouses, logistics yards, container storage facilities and other industrial applications.
Container lifting jacks are portable hydraulic devices designed to lift shipping containers vertically using multiple synchronized lifting points.
A complete container lifting system consists of four hydraulic jack units, control equipment and the required electrical and hydraulic components.
The jacks connect to the appropriate container lifting points and raise the container while maintaining controlled alignment.
Once the container has reached a suitable height, the truck chassis can be moved away according to the approved operating procedure. The system then lowers the container to the ground.
The same equipment can be used to lift a container from the ground and position it onto a compatible truck chassis.
Unlike a container tilter, which rotates a container for bulk material loading or unloading, a container jacking system performs vertical container lifting and lowering.

| Parameter | Specification |
| Product Name | Container Lifting Jacks |
| Equipment Type | Portable Hydraulic Container Jacking System |
| Standard Rated Capacity | 40,000 kg / 40 tonnes per complete system |
| Number of Lifting Units | 4 |
| Standard Rated Capacity per Unit | 10,000 kg |
| Applicable Container Length | 20ft / 40ft |
| Container Height Compatibility | Standard / High Cube, subject to configuration |
| Maximum Hydraulic Stroke | 1,750 mm |
| Single Unit Dimensions | 2,200 × 1,450 × 1,200 mm |
| Single Unit Weight | Approx. 850 kg |
| Hydraulic Cylinders | 4 units per complete system |
| Hydraulic Power Units | 4 sets |
| Operating Pressure | 16 MPa; maximum 20 MPa as listed |
| Standard Power Supply | 380V ±5%, 50Hz, Three Phase |
| Control Voltage | 24V DC |
| Operating Method | Wireless Remote Control |
| Unit Positioning | Forklift-Assisted or Manual Positioning, as applicable |
| Optional Capacity | 45-ton configuration subject to engineering confirmation |
Specifications refer to the published standard configuration. Maximum lifting capacity, operational clearance and container compatibility must be verified for the actual project.
The container jacking system uses four hydraulic lifting units positioned around the container.
The synchronized lifting arrangement helps control the container’s position during vertical movement.
The system must be operated on suitable supporting ground and within the specified weight and load-distribution limits.
The standard configuration has a rated capacity of 40,000 kg across the complete four-jack system.
Each lifting unit has a published working load rating of 10,000 kg.
The total gross weight of the container, including cargo, must remain within the approved lifting capacity and applicable container limits.
The four lifting units can be transported and positioned independently.
This makes the system suitable for locations where permanently installed container handling machinery is unavailable or unnecessary.
The system supports wireless remote control for hydraulic lifting and lowering.
Operators should follow the specified setup, locking, lifting and lowering procedures throughout the operation.
ZFITA offers adjustable top mounting arrangements intended for standard-height and high-cube containers.
Compatibility depends on the selected lifting brackets, corner connection arrangement and required operating clearance.
The standard published configuration uses 380V three-phase power at 50Hz.
Alternative voltage and frequency configurations can be reviewed according to local power availability.
The truck carrying the container is positioned on a suitable level operating surface.
The operator verifies the container type, gross weight, chassis dimensions and available working space.
Four container lifting jack units are positioned at the designated container corner lifting points.
The operator confirms that the lifting connections, ground support and equipment arrangements meet the specified requirements.
The synchronized hydraulic system raises the container in a controlled manner.
The container must remain within the permitted alignment, loading and stability limits.
Once the required clearance and safe holding conditions have been achieved, the truck chassis can be moved away using the approved operating procedure.
After the chassis is removed, the container is lowered to the designated ground position.
For loading the container onto a truck, the process is performed using the applicable reverse operating sequence.
Container lifting jacks allow operators to transfer compatible shipping containers between truck chassis and the ground.
This is particularly useful at industrial sites without permanent container cranes.
Manufacturing facilities can use container lifting systems to place containers at ground level for cargo handling, equipment preparation or temporary storage.
Portable lifting jacks can support low-frequency container transfers at suitable warehouses and logistics yards.
The equipment can be used to position compatible storage containers on suitable ground without relying on a large crane for every container delivery.
Subject to weight, center-of-gravity and corner-fitting compatibility, container lifting equipment may be considered for certain containerized machinery and industrial systems.
| Equipment | Main Function |
| Container Lifting Jacks | Lift and lower containers vertically between chassis and ground |
| Container Tilter | Tilt containers for bulk material loading or unloading |
| Reach Stacker | Lift, move and stack compatible containers |
| Container Straddle Carrier | Lift and transport containers within a yard |
| Crane | Lift and position containers using suitable lifting attachments |
Container lifting jacks are intended for vertical lifting and positioning, not for independently transporting a suspended container across a yard.

Confirm whether the operation involves 20ft, 40ft or high-cube ISO containers.
Provide the maximum total weight, including the container and its contents.
Load distribution and center-of-gravity position must also be considered.
Provide the truck chassis height and the minimum clearance required for the chassis to move away.
A hydraulic stroke of 1,750 mm should not be interpreted as guaranteed clearance for every vehicle.
Confirm the ground bearing capacity, levelness and available space around the container.
Specify the available voltage, frequency and operating environment.
Indicate how many containers will be transferred per day or week and whether the equipment will operate at one site or multiple locations.
These details help determine whether a portable hydraulic jacking system is suitable for the project.
ZFITA manufactures and supplies hydraulic container handling equipment for industrial and logistics applications.
Our equipment manufacturing and integration scope includes structural fabrication, hydraulic system assembly, mechanical integration, electrical controls and equipment testing.
For container lifting jack projects, ZFITA can review container dimensions, rated lifting requirements, mounting arrangements, electrical specifications and operating site conditions.
Customized configurations are available subject to engineering assessment.


Container lifting jacks are hydraulic lifting devices used in a coordinated system to raise and lower shipping containers vertically.
Yes, provided the container’s total gross weight and load distribution are within the rated capacity of the complete lifting system.
The published ZFITA standard configuration is rated for 40,000 kg.
ZFITA lists compatibility with both 20ft and 40ft ISO shipping containers, subject to the appropriate lifting arrangement.
For compatible vertical lifting and lowering operations, they can provide an alternative to using a crane. They do not replace the transport, stacking or long-distance positioning functions of crane and reach stacker equipment.
A container jacking system is a coordinated lifting arrangement that uses hydraulic or mechanical jacks to raise and lower a shipping container. The ZFITA configuration uses four synchronized hydraulic lifting units.
The published standard rated capacity is 40 tonnes. An optional 45-ton configuration is mentioned in ZFITA’s product information but requires separate specification confirmation.
The published hydraulic stroke is 1,750 mm. Actual available clearance depends on container attachment geometry, truck chassis dimensions and operating conditions.
A heavy-duty forklift or crane is not required to perform the container lifting operation itself. However, equipment for positioning and relocating the individual jack units may be needed.
It may be suitable for compatible storage containers where the container structure, corner fittings, lifting load and site conditions meet the equipment requirements.
The equipment is designed as a portable lifting arrangement, but a suitable load-bearing and level operating surface remains essential.
Yes. Container compatibility, power supply, lifting requirements and other project-specific configurations can be reviewed.
ZFITA supplies portable hydraulic container lifting jacks for 20ft and 40ft shipping container handling applications.
To receive a suitable equipment quotation, please provide:
Our team can review your requirements and recommend an appropriate container lifting configuration.

ZFITA manufactures 20ft, 40ft, and …
Handling heavy, abrasive, and high-volume minerals in demanding environments.
Handling critical minerals for battery production and energy storage applications.
Efficient handling of grains and agricultural commodities across the supply chain.
Discuss your material handling requirements directly with our engineers. We will help you evaluate the right equipment solution based on your application, capacity, and site conditions.
Tell us your material handling requirements. Our engineering team will provide a customized solution and quotation.